How to Replace a saab 9-3 key fob replacement 9-3 Key
The Saab 9-3 is a great car that provides a lot of appeal for drivers. It has a powerful engine as well as excellent visibility. It also has an excellent safety rating.
However, it is important to make sure that you have at minimum two keys working for your car. If you lose just one key, it can be very costly to buy another one.
How to Replace the Ignition Key in the Saab9-3
If your car’s keys won’t engage in the ignition and you want to replace it, you’ll need to replace it. This guide will teach you how to replace the ignition key on the Saab 9-3. You will need a replacement saab key key, a new reprogrammable battery and a new key-fob case.
The most modern Saab models make use of a transponder instead of a metal key to unlock the car and start it. The reprogrammable batteries that are in the key-fob eventually become worn out and will not be able to hold charge. This is especially the case if you use the same key on the same lock.
A professional locksmith can replace the battery quite easily. If you’ve got the right tools and patience you can do it yourself. The first step is to remove the key-fob apart. This is done by inserting a flathead screwdriver into the slot in the middle of the case. You must take your time, as the plastic is extremely thin and easily damaged.
Once the case has been opened, you can make the new key by combining the lower portion of the old key along with a transponder and banana. This will ensure the new key is properly mated to your CIM that can make a big difference when replacing the sole key on your saab key fob programming 9-3.
How to replace the ignition Key in a Saab 900
If you don’t have two keys, you’ll have to take off the dashboard and steering wheel to gain access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove the dashboard and trim pieces around the steering wheel. After the dashboard has been removed, you can place an opening with a screwdriver behind the ignition switch.
The ignition cylinder is equipped with an ignition lock that can stop the vehicle from starting if the key isn’t there. If the ignition switch isn’t working correctly, make sure to check whether the key is in the lock or snared inside the ignition barrel. It is also recommended to rotate your keys and keep them clean to prevent breaking.
Saab cars differ from other cars due to the fact that they do not have traditional metal keys. Instead, the car is able to recognize electronic signals coming from the key fob using the use of a special microchip.
If you lose just one key fob that is working, your dealer will charge a premium to replace your computer module (also known as the CIM). We can reprogram the EEPROM on your current computer to enable it to accept new keys, without the need to replace it. You’ll save up to 50% off the price of the dealer! We call it the saab spare key (https://Clashofcryptos.trade) KEY PROGRAM. Learn more about it here!
How to Replace the Ignition Key on a Saab 9-5
The metal part of the classic saab replacement key keys is easy to copy and doesn’t pose a significant threat to theft of vehicles. The electronic component of the key-fob has a chip that recognizes the car when the key is put in the ignition switch.
Saab has relied on the technology of this anti-theft device for more than 10 years. It’s not as secure as an actual lock on the door however it makes the theft of your car much harder. This is why every Saab owner should always keep a spare key on hand.
The majority of new Saabs are delivered with two keys. However, they can be added by the dealer’s expense using a handheld device known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is NG 9-3 vehicles, which come with modernized, more modern features that require a separate key-fob, and use a different method of operation.
The dealer will replace the CIM or TWICE module of those cars if all keys are lost, and cost you top dollar for doing it. We can reprogram your computer’s EEPROM to accept new keys, without replacing expensive modules.
How do you replace the ignition Key in an XC90 Saab
It’s possible to replace your SAAB key fob if it’s having trouble turning the barrel of the lock. The process is quite simple and doesn’t require you to visit an agent. You can complete the process at home, using a couple of basic tools.
The first step is to prepare the new key. Before starting, make sure that the anti-theft feature is disabled by placing blocks on your rear wheels and activating the handbrake. Then, you can insert the key into the ignition and move it to the on position which activates the accessories but it doesn’t start the engine. Repeat this 5 times, and then leave the key in the “on” position.
Then you’ll need to buy an additional case for your key fob. They can be found at a variety of auto parts stores and are typically very affordable. Depending on the model, you could even buy them without electronics.
To open the case simply push the screwdriver with a flathead into the slot in the middle. When you’ve split the case, you will be able to access all the internal electronics. Use a flathead screwdriver to gently pull out the electronic components.